Skip to Content
 Handcrafted Kinetic Sculptures by Kyle's Kinetics
Shop
Meet Kyle
How It's Made
Past Works
Contact
0
0
 Handcrafted Kinetic Sculptures by Kyle's Kinetics
Shop
Meet Kyle
How It's Made
Past Works
Contact
0
0
Shop
Meet Kyle
How It's Made
Past Works
Contact
Past Works Detailed Pro Snowboarder (One-of-a-kind)
snowboarder-2.JPG Image 1 of 15
snowboarder-2.JPG
snowboarder-1.JPG Image 2 of 15
snowboarder-1.JPG
snowboarder-3.JPG Image 3 of 15
snowboarder-3.JPG
snowboarder-8.JPG Image 4 of 15
snowboarder-8.JPG
snowboarder-4.JPG Image 5 of 15
snowboarder-4.JPG
snowboarder-5.JPG Image 6 of 15
snowboarder-5.JPG
snowboarder-6.JPG Image 7 of 15
snowboarder-6.JPG
snowboarder-7.JPG Image 8 of 15
snowboarder-7.JPG
snowboarder-9.JPG Image 9 of 15
snowboarder-9.JPG
snowboarder-10.JPG Image 10 of 15
snowboarder-10.JPG
snowboarder-11.JPG Image 11 of 15
snowboarder-11.JPG
snowboarder-12.JPG Image 12 of 15
snowboarder-12.JPG
snowboarder-13.JPG Image 13 of 15
snowboarder-13.JPG
snowboarder-14.JPG Image 14 of 15
snowboarder-14.JPG
snowboarder-15.JPG Image 15 of 15
snowboarder-15.JPG
snowboarder-2.JPG
snowboarder-1.JPG
snowboarder-3.JPG
snowboarder-8.JPG
snowboarder-4.JPG
snowboarder-5.JPG
snowboarder-6.JPG
snowboarder-7.JPG
snowboarder-9.JPG
snowboarder-10.JPG
snowboarder-11.JPG
snowboarder-12.JPG
snowboarder-13.JPG
snowboarder-14.JPG
snowboarder-15.JPG

Detailed Pro Snowboarder (One-of-a-kind)

$225.00
Sold

(the one pictured has been sold but can be made again. May vary slightly)

PLEASE WATCH THE VIDEO BELOW! - it does a much better job of showing the shapes and details.

Description:

This pro snowboarder has a lot of details! I spent a lot of time making him. Starting with a thicker body made from solid 1/4' thick stainless rod to give the appearance he is wearing bulky snow gear. Then I made and shaped snow gloves and gave him tiny thumbs. Goggles with a strap were made and wrapped around his head. The scarf was really tough to make as well but adds a really cool layer and appearance that his mouth is covered by the scarf. His boots are made of even thicker 5/16" bar stock and shaped accurately. Once all that was complete, I made a proportionally sized snow board and attached him to it. After that, He found his balance with a large, solid stainless counterweight!

A precision base is included!!

Dimensions:

The snowboarder himself is 3" tall

The whole sculpture from bottom of the base to top of his head is 7" tall.

The length of the balancing rod and weight is 8"

Add To Cart

(the one pictured has been sold but can be made again. May vary slightly)

PLEASE WATCH THE VIDEO BELOW! - it does a much better job of showing the shapes and details.

Description:

This pro snowboarder has a lot of details! I spent a lot of time making him. Starting with a thicker body made from solid 1/4' thick stainless rod to give the appearance he is wearing bulky snow gear. Then I made and shaped snow gloves and gave him tiny thumbs. Goggles with a strap were made and wrapped around his head. The scarf was really tough to make as well but adds a really cool layer and appearance that his mouth is covered by the scarf. His boots are made of even thicker 5/16" bar stock and shaped accurately. Once all that was complete, I made a proportionally sized snow board and attached him to it. After that, He found his balance with a large, solid stainless counterweight!

A precision base is included!!

Dimensions:

The snowboarder himself is 3" tall

The whole sculpture from bottom of the base to top of his head is 7" tall.

The length of the balancing rod and weight is 8"

(the one pictured has been sold but can be made again. May vary slightly)

PLEASE WATCH THE VIDEO BELOW! - it does a much better job of showing the shapes and details.

Description:

This pro snowboarder has a lot of details! I spent a lot of time making him. Starting with a thicker body made from solid 1/4' thick stainless rod to give the appearance he is wearing bulky snow gear. Then I made and shaped snow gloves and gave him tiny thumbs. Goggles with a strap were made and wrapped around his head. The scarf was really tough to make as well but adds a really cool layer and appearance that his mouth is covered by the scarf. His boots are made of even thicker 5/16" bar stock and shaped accurately. Once all that was complete, I made a proportionally sized snow board and attached him to it. After that, He found his balance with a large, solid stainless counterweight!

A precision base is included!!

Dimensions:

The snowboarder himself is 3" tall

The whole sculpture from bottom of the base to top of his head is 7" tall.

The length of the balancing rod and weight is 8"

TOOLS & SPONSORS

Copyright © 2025 Kyle's Kinetics All Rights Reserved